	New features and Fixes in Service Pack - Updates to EDWinXP Ver 1.40					---------------------------------------------------------------------------------------------------------

Who must install?
--------------------------

All EDWinXP ver 1.40 users who updated with the previous offline update, may install this pack to get the latest updates.

How to install?
-----------------------

Unzip the contents of the downloaded zip file to /EDWinXP folder. Updation is over.

What are the updates?
------------------------------

New Features
-------------------

1. Installation

	a) Docone and EDComX is also available with the new CD.

2. MM Simulation Model Generator
	
	a) Analog Model Type

MM Simulation Model Generator enables to generate models of analog circuit elements. The logic function of analog elements may be very precisely described in so-called SPICE netlist format. Therefore the source for analog model generation is ASCII file containing SPICE sub-circuit.

3.  Library Editor

	a) Triangular Package and Padstack which allows to create triangular package and padstack.

4.  Layout Editor
 
	a) Auto-connect functions
	Auto-connect tools in Layout Editor are complement to manual trace routing tools.  
	Auto-connect functions allow executing following tasks:

		Re-routing all traces currently connected to a component(s) subsequently to its relocation 
		Routing connection from node to node 
		Routing connections for all nodes in selected net with the option to keep pre-routed traces unaltered.
		Routing connection from selected net element (existing trace or node) to closest located element in the same net
		Routing lead-out traces from component nodes
		Clearing a zone around a component(s) and re-routing all traces not connected to this component outside of the 			zone boundaries
		Removing redundant via holes on the whole board
		Mitering all traces on the board in 45 degrees

5. Fabrication Manager

	a) Bitmaps can be inserted as logos in fabrication manager .
